Discover jobs
Job Search
journeyman/woman plumber Apprentice job
Posted on September 18, 2024 by Employer details Star Mechanical (Edm) Ltd.
Job details
Education: Secondary (high) school graduation certificate. Work site environment: Outdoors. Hot. Cold/refrigerated. Work setting: Commercial. Residential. Tasks: Read blueprints, drawings and specifications to determine layout of plumbing system, water supply network and waste and drainage systems. Locate and mark positions for pipe connections, passage holes and fixtures in walls and floors. Cut opening in walls and floors to accommodate pipe and pipe fittings. Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment. Test pipes for leaks using air and water pressure gauges. Determine piping system requirements and pipe sizing. Measure, cut, thread and bend pipes to required shape and size. Measure, cut and connect piping using welding and brazing equipment. Measure and lay out reference points for installation. Handle, recover and store refrigerants. Coach and instruct apprentices. Assemble and install refrigeration or air conditioning components. Provide customer service. Make adjustments and minor repairs to heating, cooling, ventilation, plumbing and electrical systems, and contact tradespersons for major repairs. Start up system and test for leaks using testing devices. Perform maintenance such as, recharging system with refrigerant, checking and testing regulators or calibrating system. Repair and replace parts and components for entire refrigeration, air conditioning, ventilation or heat pump systems. Apprenticeship training: Level one apprenticeship training. Level two apprenticeship training. Level three apprenticeship training. Level four apprenticeship training. Level five apprenticeship training. Type of service and repair: Programmable logic controller (PLC). Types of systems: Plumbing, cold water and drain lines. Control systems: On-board diagnostics. Energy conservation. Computerized monitoring. Electrical devices. Air conditioning and refrigeration systems: Filtration. Humidification and de-humidification system. Security and safety: Criminal record check. Transportation/travel information: Own vehicle. Valid driver's licence. Work conditions and physical capabilities: Physically demanding. Bending, crouching, kneeling. Handling heavy loads. Manual dexterity. Attention to detail. Standing for extended periods. Own tools/equipment: Tools. Steel-toed safety boots. Personal suitability: Accurate. Client focus. Judgement. Team player. Initiative. Dependability. Reliability. Punctuality. Screening questions: Are you currently legally able to work in Canada?. Do you currently reside in proximity to the advertised location?. Do you have previous experience in this field of employment?. Do you have the above-indicated required certifications?. Experience: Experience an asset. Workplace information: On the road job. Health benefits: Dental plan. Disability benefits. Health care plan. Vision care benefits. Financial benefits: Group insurance benefits. Life insurance. Mileage paid. Piece work. Registered Retirement Savings Plan (RRSP). Other benefits: Free parking available. Learning/training paid by employer. Other benefits. Team building opportunities. Parking available. Travel insurance. Wellness program.- LocationEdmonton, AB
- Workplace information On the road
- Salary$20.00 to $40.00HOUR hourly (To be negotiated) / 37.5 to 44 hours per week
- Terms of employment Permanent employmentFull time
- Day
- Starts as soon as possible
- Benefits: Health benefits, Financial benefits, Other benefits
- vacancies 4 vacancies
- Source Job Bank #3086750
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
Experience an asset
On the road
Work locations may vary. Frequent or constant travel is required from the employee.
Work site environment
- Outdoors
- Hot
- Cold/refrigerated
Work setting
- Commercial
- Residential
Responsibilities
Tasks
- Read blueprints, drawings and specifications to determine layout of plumbing system, water supply network and waste and drainage systems
- Locate and mark positions for pipe connections, passage holes and fixtures in walls and floors
- Cut opening in walls and floors to accommodate pipe and pipe fittings
- Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment
- Test pipes for leaks using air and water pressure gauges
- Determine piping system requirements and pipe sizing
- Measure, cut, thread and bend pipes to required shape and size
- Measure, cut and connect piping using welding and brazing equipment
- Measure and lay out reference points for installation
- Handle, recover and store refrigerants
- Coach and instruct apprentices
- Assemble and install refrigeration or air conditioning components
- Provide customer service
- Make adjustments and minor repairs to heating, cooling, ventilation, plumbing and electrical systems, and contact tradespersons for major repairs
- Start up system and test for leaks using testing devices
- Perform maintenance such as, recharging system with refrigerant, checking and testing regulators or calibrating system
- Repair and replace parts and components for entire refrigeration, air conditioning, ventilation or heat pump systems
Credentials
Apprenticeship training
- Level one apprenticeship training
- Level two apprenticeship training
- Level three apprenticeship training
- Level four apprenticeship training
- Level five apprenticeship training
Experience and specialization
Type of service and repair
- Programmable logic controller (PLC)
Types of systems
- Plumbing, cold water and drain lines
Control systems
- On-board diagnostics
- Energy conservation
- Computerized monitoring
- Electrical devices
Air conditioning and refrigeration systems
- Filtration
- Humidification and de-humidification system
Additional information
Security and safety
- Criminal record check
Transportation/travel information
- Own vehicle
- Valid driver's licence
Work conditions and physical capabilities
- Physically demanding
- Bending, crouching, kneeling
- Handling heavy loads
- Manual dexterity
- Attention to detail
- Standing for extended periods
Own tools/equipment
- Tools
- Steel-toed safety boots
Personal suitability
- Accurate
- Client focus
- Judgement
- Team player
- Initiative
- Dependability
- Reliability
- Punctuality
Benefits
Health benefits
- Dental plan
- Disability benefits
- Health care plan
- Vision care benefits
Financial benefits
- Group insurance benefits
- Life insurance
- Mileage paid
- Piece work
- Registered Retirement Savings Plan (RRSP)
Other benefits
- Free parking available
- Learning/training paid by employer
- Other benefits
- Team building opportunities
- Parking available
- Travel insurance
- Wellness program
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: