Discover jobs
Job Search
drywall finisher
Posted on November 22, 2024 by Employer details Rashpal Contracting Ltd.
Job details
Education: Secondary (high) school graduation certificate. Work site environment: Dusty. Noisy. Work setting: Commercial. Residential. Various locations. Tasks: Supervise other workers. Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Clean and prepare surfaces. Cut and install metal corner beads to protect exterior corners. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Attach metal or gypsum lath to studs or furring. Install corner beads and wire mesh around beams to which plaster is to be applied. Utilize laser alignment system. Work conditions and physical capabilities: Bending, crouching, kneeling. Handling heavy loads. Large workload. Physically demanding. Tight deadlines. Work under pressure. Weight handling: Up to 45 kg (100 lbs). Own tools/equipment: Hard hat. Steel-toed safety boots. Screening questions: Are you currently legally able to work in Canada?. Do you have previous experience in this field of employment?. What is your current level of study?. Experience: 1 year to less than 2 years. Other benefits: Transportation provided by employer.- LocationSurrey, BC
- Workplace information On site
- Salary$34.62HOUR hourly / 40 hours per week
- Terms of employment Permanent employmentFull time
- Day
- Starts as soon as possible
- Benefits: Other benefits
- vacancies 2 vacancies
- Source Job Bank #3161551
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
1 year to less than 2 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Work site environment
- Dusty
- Noisy
Work setting
- Commercial
- Residential
- Various locations
Responsibilities
Tasks
- Supervise other workers
- Apply successive coats of compound and sand seams and joints
- Apply, level and smooth coats of plaster
- Clean and prepare surfaces
- Cut and install metal corner beads to protect exterior corners
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Attach metal or gypsum lath to studs or furring
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Utilize laser alignment system
Additional information
Work conditions and physical capabilities
- Bending, crouching, kneeling
- Handling heavy loads
- Large workload
- Physically demanding
- Tight deadlines
- Work under pressure
Weight handling
- Up to 45 kg (100 lbs)
Own tools/equipment
- Hard hat
- Steel-toed safety boots
Benefits
Other benefits
- Transportation provided by employer
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-12-22
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: